.

GX-480 Gas Tunnel Hull

This 48" hull is perfect for the Gas Tunnel Hull Class or for any of the large K&B outboard motors

NEWS FLASH -

Rick Grim just set the IMPBA Straightline record at 68.119 MPH and the 1/3 mile oval at 51.679 MPH with the GX-480

PX-300 NX-300 NX-320 PX-335 NX-365 NX-400 GX-480 QX-400

PX-300

The PX-300 is our newest design that has set the standard for performance in the Fast Electric P-Limited class.

View Page

NX-300

The NX-300 is the same outstanding hull design, but modified to run a nitro outboard motor. If you want to race or just have fun the NX-300 is one of the best performing RC tunnels hulls on the market today

View Page

NX-320

The NX-320 is our 32" hull designed for todays modified .21 engines. The added length helps handle that added power The 320 is at home on the race course or just running around for fun

View Page

PX-335

The PX-335 is our entry in the Fast Electric P class. At 33" long this boat has room for 2, 4S batteries and can handle the hottest electric motor, for some of the best performance in this hotter class

View Page

NX-365

Our newest hull designed for the 7.5 Outboard. This 36" hull can handle even the hottest 7.5 engine and turns like its on rails

View Page

NX-400

The NX-400 is our largest Nitro hull. At 40" long this was designed for the 11cc Outboard, but many are using this for rough water course with a 7.5 outboard.

View Page

GX-480

The GX-480 Gas Tunnel Hull, now holds the IMPBA straight line and 1/3 oval record set by Rick Grim. Congradulations Rick!!

View Page

QX-400

The QX-400 Fast Electric Tunnel Hull, for the new Q class tunnel hulls

View Page
small portfolio1 small portfolio2 small portfolio3 small portfolio4
themed object
Primary Tagline
get in touch
[Templates/Library/component-google-site-search/google-site-search.htm]
Describe the photo or the page it links to

 

GX-480 Gas Tunnel hull

This 48" hull is designed for new Gas Tunnel Hull Class. Runs with any of the Zenoah Gas motors or similar using the "Lawless CUTTHROAT G-DRIVE lower unit. And any of the large K&B outboard motors including the new K&B 1.0 Inch Outboard.

As with all our kits, they are easy to build and come complete with all the laser cut plywood parts needed to build the complete hull and radio box. We aslo include a digital assembly manual loaded with lots of pictures to make the assembly a breeze. And include a white Gel coat fiberglass cowl trimmed at the factory to fit your hull.

 

This is advertising space for google ads, affiliate links or anything else you can think of

... this space will grow as you add more information ...

slide up button